2006-2013 FXD Renegade Rev. 6
11.
See Fig. 5
. Install (1) striker pin GL2041 to (1) striker pin
bracket LB1297 using (1) 5/16” plated lock nut CN3045.
12. Attach striker pin bracket to door using (2) 1/4” lock washers
CW2040 and (2) 1/4 -20 x 1/2” bolts CB1075.
13. Install (1) Renegade badge to bottom right side of door.
14. Install (1) Lehman badge GB1320 to bottom left side of door.
15. Fasten door to hinges using (4) 10/32 x 3/8” screws CS4024-1.
16. Attach stop cables to door using (2) 1/4”-20 x 1/2” hex head
bolts CB1075 (from body bolt bag) and (4) 1/4” Gr. 8 washers
CW2005.
17. Cut license plate wire from body to length (approx 12-14”)
18. Install shrink tubing over license plate wires.
19. Strip and solder ends of license plate wires from the body and door together.
20. Slide shrink tubing over soldered connections and heat.
21. Fasten wiring to trunk door.
Fig. 5
Striker pin
and bracket
28
