2006-2013 FXD Renegade Rev. 6
Brake System
CAUTION: Brakes are a critical safety component of the
trike. Verify all brake components have been properly
installed before test riding. Improper brake operation
could result in death or serious injury. Do not allow dirt
or debris to enter master cylinder reservoir. Brake pads
will need to be seated in during initial test ride.
Brake System
1.
See Fig. 1.
Attach brass tee to differential brace using
the following hardware.
(1) Brass Tee– CF5105
(1) Spacer– S001530
(2) 1/4” x 1-3/4” Hex Bolt– CB1100
(2) 1/4” Flat Washers– CW2005
(2) 1/4” Lock Nut– CN3042
2.
See Fig. 1
. Install original brake line from master cylinder
and rear braided lines to brass tee using the following
hardware. Torque banjo bolt to
16 ft. lbs.
(1) Banjo Bolt– S002022
(2) Banjo Washers- GC6002
(2) 45” M10 Braided Line– S001976
3.
See Fig. 2
. Install (2) braided brake lines to rear calipers
as shown. Torque bolts to
16 ft. lbs
.
(2) M10 Banjo Bolt– CB6001
(4) M10 Banjo Washers- GC6002
4. Secure brake lines to swingarm with cable ties.
Fig. 2
Install brake lines to LH/RH
Fig. 1
12
