2006-2013 FXD Renegade Rev. 6
Position exhaust system with jack stand, then install muffler bracket (LB6104) to mufflers with (2) 5/16”
x 3/4” carriage bolts (CB1529) and 5/16” flange nuts. Position mount so it is pointing toward front of
motorcycle.
3.
Install rubber isolator (GM0300) into slot on muffler bracket (LB6104).
Fig. 2
4.
Insert bracket (GB1200) into rubber isolator. Attach bracket to Lehman frame using (2) 5/16” x 1 1/2”
bolts, four (4) 5/16” flat washers, exhaust spacers (LS6101) and lock nuts.
Fig. 3
5.
Adjust mufflers and pipes so they run even and parallel to one another.
6.
Fasten exhaust clamps to joint. Position clamps so they do not squeeze a slit open on the sides, and
clamp opening does not line up with slits in pipe.
7.
Inspect exhaust system for exhaust leaks and install heat shields. Trim rear head pipe head shields
as needed.
21
