2006-2013 FXD Renegade Rev. 6
Installing Exhaust
1.
All heat shields should be removed. Mufflers, muffler support and rear bracket should be
disassembled.
2.
Stock rear header pipe will need to be cut approximately 3 ½” back from center of cross-over tube.
Install exhaust pipes LP6100 and LP6101 onto stock header pipes. Slide exhaust clamps into position
and leave loose. Install mufflers onto Lehman exhaust pipes with muffler mounting plates pointing up.
NOTE: Lehman pipes may need to be cut depending on muffler location.
Fig. 1
20
