22
_________________________________________________________________________________
5.1.2 Electric motor
1. Choose preferred control position (lower controls or platform controls)
2. Press electric motor start button, the button does not need to be held down.
3. Press start/stop button again to stop the motor.
5.2 Speed selection switch
This access platform is equipped with three speed ranges. The speed selection switch will define the
maximum speed for either boom or drive.
5.3 Drive control
This access platform is equipped with hydrostatic transmission. The drive is controlled with two levers.
Pushing the left-hand side lever forward will spin the left-hand side wheels or tracks forward and
pulling the lever will drive the left side backwards. Right-hand side will work accordingly on the right-
hand side lever.
1. Drive levers
2. Water level
To operate drive function:
1. Ensure all booms are on their transport supports, all four outriggers are lifted from the ground
and the wheels/tracks are firmly against ground.
•
Make sure boom transport support indicator light is lit (see 4.1.6).
•
Make sure that the green automatic leveling light (Figure 5 (5))
is not continuously
on or blink
.
2. Start the desired engine.
3. Choose preferred driving speed (see 5.2). Changing the drive speed while the access platform
is moving is forbidden!
4. Move drive control levers carefully from the center position.
The access platform can only be driven when all booms are on their transport
positions!
NOTE! Learn how to drive with the machine at a low speed. Operate the drive control
levers with ease in order to avoid abrupt and jerky movements. When driving pay
special attention to stability and the dimensions, especially length, of the machine.
NOTE! TOWING THE ACCESS PLATFORM IS FORBIDDEN, RISK OF DAMAGE!
1
2
Figure 10: Drive control levers
