5
I forgot my password:
Hold the reset button under the sensor lens for 15 seconds. This will reset the device to default values and allow you to assign a new
password.
I can’t discover the sensor on the app:
If you do not connect with the sensor for 7 days after being powered on, the radio stops broadcasting. Power cycle the sensor in order to
enable the radio.
OPERATION DURING POWER-UP
The first time the sensor is installed and powered, there will be 50 seconds of warm-up. The load will turn OFF after the warm up time if
no motion is detected.
ORDERING INFORMATION
Catalog #
Description
FSP-301B
Single/ Dual Phase, Continuous Dimming PIR Fixture Integrated Sensor in IP66 Enclosure
FSP-301B-S
Single/ Dual Phase, Continuous Dimming PIR Fixture Integrated Sensor in IP66 Enclosure, with Straight Nipple Mount
FSP-301B-D
Single/ Dual Phase, Continuous Dimming PIR Fixture Integrated Sensor in IP66 Enclosure, with Drop Nipple Mount
FSP-L2
360° lens, up to 44’ diameter at 8’ height
FSP-L2-S
360° lens, up to 44’ diameter at 8’ height, with shroud
FSP-L3
360° lens, up to 40’ diameter at 20’ height
FSP-L3-S
360° lens, up to 40’ diameter at 20’ height, with shroud
FSP-L7
360° lens, up to 100’ diameter at 40’ height
FSP-L7-S
360° lens, up to 100’ diameter at 40’ height, with shroud
FSP-C1
Small collar, for use with FSP-L2 and FSP-L3 lenses
FSP-C2
Large collar, for use with FSP-L7 lens
Sensor colors indicated by one of the following suffixes at the end of the catalog #:
-W = White; -BL = Black; -BR = Bronze/Brown; -G = Gray/Silver
FCC ID: Q4B-FSP-3X1
FCC REGULATORY STATEMENTS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
This device complies with FCC and IC safety levels of radio frequency (RF) exposure for Mobile devices.
This device is only authorized for use in a mobile application. At least 20 cm of separation distance between this device and the user’s
body must be maintained at all times.
Any changes or modifications not expressly approved by The Watt Stopper Inc. could void the user’s authority to operate the equipment.
IC REGULATORY STATEMENTS
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation of the device.
In order to enhance the security of our products, Legrand ships its products with all insecure ports closed and insecure protocols
disabled. You are free to configure your device as needed, but in doing so note that you may be decreasing the security of your device
and any information contained in the device. As you modify the device’s default settings, keep in mind how this may impact the security
of the device and your network. In addition, you should use caution in connecting your device to the Internet, especially if you have
altered the default security settings. If you have any questions or concerns about how your modifications of the device may affect its
security, please contact the Legrand customer service team at 1-800-879-8585 / https://www.legrand.us/support/wattstopper.aspx
