LEGRAND Raritan Dominion User Station User Manual Download Page 139

Page: 139 / 284

Appendix A: Setting User Preferences

129

Move Keys

Move Keys are key combinations that move the foreground window around on

the desktop. You can enable or disable these hotkeys using the "Move Keys"

setting. See

Hotkeys and Gestures

(on page 127).

Hotkey

Function

Ctrl + Alt + Shift +

When there are two monitors connected, move the window to the other

monitor.

Ctrl + Alt + Shift +

Ctrl + Alt +

Move the window to the screen edge in the specified direction on the

monitor.

Ctrl + Alt +

Ctrl + Alt + 1 (on the keypad)

Move the window to the screen corner in the specified direction on the

monitor.

Ctrl + Alt + 3 (on the keypad)

Ctrl + Alt + 7 (on the keypad)

Ctrl + Alt + 9 (on the keypad)

Ctrl + Shift +

Move the window, in the specified direction, to the nearest edge, which is one

of the following:



Borders of another window



Monitor edges in the dual-monitor configuration



Desktop boundaries

Ctrl + Shift +

Ctrl + W

Enlarge the window in the specified direction until its border touches the

nearest edge, which is one of the following:



Borders of another window



Monitor edges in the dual-monitor configuration



Desktop boundaries

Note: If the window border already aligns with the screen edge, the

window size shrinks instead.

Ctrl + W

Summary of Contents for Raritan Dominion User Station




























































































































































































































































































Search results

Summary of Contents for Raritan Dominion User Station

Reviews:

LEGRAND Raritan Dominion User Station, User Manual, Page: 139 / 284

Search results

Summary of Contents for Raritan Dominion User Station

Reviews: