PRSU
Installation Instructions
6
6.
With faceplate facing front of base, line up column with
mounting holes in base and lower into place. (See Figure 5)
Figure 5
7.
Pull out column latching handle. (See Figure 6)
8.
Move handle to right until it retracts at the far right side of
opening. (See Figure 6)
9.
Ensure that handle retracts into base (A) to lock column (B)
into place. (See Figure 6)
Figure 6
Installing Interface Bracket
1.
Prepare to adjust height of column by holding both handles,
pulling the inner handle and lifting. (See Figure 7)
2.
Adjust height of column up or down as required.
3.
Release the inner handle to move column to the closest
height setting and to lock column height in place.
Figure 7
4.
Assemble and install the PSBU interface bracket to the
display, following installation instructions included with the
PSBU interface bracket.
(B)
(A)
6
8
7
9
Locking handle
[UNLOCKED]
Locking handle
[LOCKED]
[column not shown]
2
3
1
Inner
handle