background image

 PRSU

Installation Instructions

2

DISCLAIMER

Legrand 

|

 AV and its affiliated corporations and subsidiaries 

(collectively “Legrand 

|

 AV”), intend to make this manual 

accurate and complete. However, Legrand 

|

 AV makes no claim 

that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible 
contingency in connection with the installation or use of this 
product. The information contained in this document is subject 
to change without notice or obligation of any kind. Legrand 

|

 AV 

makes no representation of warranty, expressed or implied, 
regarding the information contained herein. Legrand 

|

 AV 

assumes no responsibility for accuracy, completeness or 
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM: 

A MOUNTING SYSTEM is the 

primary Chief product to which an accessory and/or component 

is attached.

ACCESSORY: 

AN ACCESSORY is the secondary Chief 

product which is attached to a primary Chief product, and may 

have a component attached or setting on it.

COMPONENT: 

A COMPONENT is an audiovisual item 

designed to be attached or resting on an accessory or mounting 

system such as a video camera, CPU, screen, display, 

projector, etc.

WARNING:  

A WARNING alerts you to the possibility of 

serious injury or death if you do not follow the instructions.

CAUTION:  

A CAUTION alerts you to the possibility of 

damage or destruction of equipment if you do not follow the 

corresponding instructions.

 IMPORTANT SAFETY INSTRUCTIONS

WARNING:  

Failure to read, thoroughly understand, and 

follow all instructions can result in serious personal injury, 
damage to equipment, or voiding of factory warranty! It is the 
installer’s responsibility to make sure all mounting systems

 

are properly assembled and installed using the instructions 
provided. 

WARNING:  

For use with televisions weighing 200 lbs  (90.7 

kg) or less. Use with heavier televisions may result in 
instability causing tip over resulting in death or serious injury. 

WARNING:  

Use this mounting system only for its intended 

use as described in these instructions. Do not use 
attachments not recommended by the manufacturer.

WARNING:  

Never operate this mounting system if it is 

damaged. Return the mounting system to a service center for 
examination and repair.

WARNING:  

Do not use this mounting system outdoors.

WARNING:  

RISK OF SERIOUS INJURY OR DEATH! 

Placing a remote control or toy on the stand may encourage a 
child to climb onto the stand causing the stand to tip over 
onto the child. DO NOT place remote controls or toys on the 
stand!

WARNING:  

RISK OF SERIOUS INJURY OR DEATH! 

Relocating audio and/or video equipment to the stand may 
result in the stand collapsing or overturning onto a child. DO 
NOT relocate audio and/or video equipment to the stand!

CAUTION:  

Do not use the column handles for carrying, 

transporting, lifting or moving the PRSU. The handles should 
only be used for adjusting the column height (with display and 
cables removed).

CAUTION:  

Engage latch lock BEFORE loading stand. 

Unload stand BEFORE disengaging the latch.

CAUTION:  

PINCH POINT! Keep hands clear when folding 

the base.

NOTE:  

The PRSU stand has no user serviceable parts.

NOTE:  

The PRSU should be regularly inspected for damage. 

NOTE:  

The PRSU stand can support screen sizes up to a 

maximum of 80" diagonal.

--SAVE THESE INSTRUCTIONS--

Summary of Contents for CHIEF PRSU













Reviews: