background image

Installation Instructions

 LPE1U

3

WARNING

:  

RISK OF SERIOUS INJURY OR 

DEATH! Relocating audio and/or video equipment to furniture 
not specifically designed to support audio and/or video 
equipment may result in death or serious injury due to the 
furnishing collapsing or overturning onto a child.

NOTE:  

The LPE1U cart has no user serviceable parts.

NOTE:  

The LPE1U cart can support screen sizes up to a 

maximum of 86".

NOTE:  

The LPE1U cart is intended for Institutional Use.

NOTE:  

To reduce the risk of electric shock, this furnishing has 
a polarized plug (one blade is wider than the other). 
This plug will fit in a polarized outlet only one way. If the 
plug does not fit fully in the outlet, reverse the plug. If it 
still does not fit, contact a qualified electrician to install 
the proper outlet. Do not change the plug in any way.

NOTE:  

This product is a double-insulated, cord-connected 

product and must be serviced accordingly. In a double-
insulated product, two systems of insulation are 
provided instead of grounding. No grounding means for 
grounding to be added to the product Servicing a 
double-insulated product requires extreme care and 
knowledge of the system, and is to be done only by 
qualified service personnel. Replacement parts for a 
double-insulated product must be identical to the parts 
they replace. A double-insulated product is marked 
with the symbol (square within a square) 

NOTE:  

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee 
that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which can 
be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by 
one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment 

and receiver.

Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 

connected.

Consult the dealer or an experienced radio/TV 

technician for help.

CAUTION: 

Changes or modifications to this 

unit not expressly approved by the manufacturer can void the 
units FCC compliance rating and make the unit illegal to 
operate.

Responsible Party: 

Legrand | AV
6436 City West Parkway
Eden Prairie, MN 55344
866-977-3901
[email protected]

CAN ICES-3 (B)/NMB-3(B)

--SAVE THESE INSTRUCTIONS--

Electrical Specifications

Input voltage, frequency

100-240 V~, 50-60 Hz, 450W

Duty Cycle

Intermittent: 10%; max 2 
minutes on/18 minutes off

Summary of Contents for CHIEF LPE1U

















Reviews: