Installation Instructions
LPE1U
11
Figure 12
Figure 13
23. Use two 1/4-20 x 1/2” Phillips pan machine screws (Q) to
attach two cable hooks (S) to cross brace (X). (See Figure
14)
Figure 14
Display Installation
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the weight of all
components attached to the LPE1U does not exceed 200 lbs
(90.7 kg).
1.
Make sure height is at the lowest possible position.
2.
Make sure latching flags are in "open" position.
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware. Only use hardware provided or specified by
manufacturer.
A
B
C
D
F
(rear view)
E
(S) x 2
(N) x 2
23
(X)