Manageable Mosaic switch Installation and User Guide
Page 55 of 87
3. The new factory defaults will be activated after the next Restore Factory Default
command.
4.3.3
Restoring manageable Mosaic switch Factory Default Settings
1. Log in to the LCS
2
- FTTO Init application.
2. From the LCS
2
- FTTO Init application menu, click
Commands
, and choose
Restore
Factory Defaults
. The following prompt is displayed.
Figure 4-9 Restoring Factory Defaults via Embedded web interface
3. Click
Yes
to restore the device’s factory defaults.
4.3.4
Configuring Active Management Interfaces
Factory defaults configure all three management interfaces (SNMP, Web and Telnet) to be active. This
configuration can be changed for the device to be only managed by one or a combination of two
management interfaces
To configure the management interfaces proceed as follows:
1. From the
Embedded web interface main
screen, click
System Config
. The
System
Configuration
window appears.
2. Click the
Config
tab of the
System Configuration
window. The following screen is
displayed.
SUMMARY