Manageable Mosaic switch Installation and User Guide
Page 48 of 87
Please enter new boot parameters
SNMP get community [public] -
SNMP set community [private] -
TFTP server address [192.168.0.13] -
FTP user [HighPerf] -
FTP password [highperf] -
TFTP filename [wp68x_040104.bin] –
Boot operation [1: Download, 2: Run] – 2
Modify the above or continue? [M/C] - c
You will be prompted to change the
SNMP Community String
.
The community string is part of any SNMP packet. The SNMP agent does not respond to SNMP
packets whose community string does not match its internal community string. The community string is
an alphanumeric string of up to 15 alphanumeric characters.
SNMP defines different community strings for Get and Set commands. The factory default community
settings of the device are:
•
SNMP Get community - public
•
SNMP Set community - private
The TFTP prompt appears, enabling to change the TFTP parameters which refer to firmware upgrades.
This is usually necessary at this stage. Consequently, press
enter
at each of the following prompts.
Refer to Section 7.2 for complete instructions on local and remote firmware upgrade.
Three Boot operation possibilities are available. Option 1 refers to firmware upgrades using TFTP as
described in Section 7. Option 2 allows restart of the unit with the new parameters.
The next step of this final configuration session continues by typing C, or to return in order to modify
one or more of the previous entries by typing M.
The unit restarts with the updated parameters displayed on the screen as follows:
SUMMARY
