Manageable Mosaic switch Installation and User Guide
Page 59 of 87
Figure 5-1 Management menu, Access List tab
2. Click
Add
, type the IP address of the remote manager’s workstation from which access
will be allowed in the new window and click
OK
. Repeat for each additional IP address
to be added (up to eight).
3. Verify that the IP address of the active manager (issuing the command) is on the
Access List
.
4. From the Enable/Disable list, select
Enable
.
5. Click
Apply
and then click
Yes
in the verification window.
To delete an address select the address from the list and click Delete.
5.1.4
Management Interfaces
Factory defaults configure all three management interfaces (SNMP, Web and Telnet) to be active. This
configuration can be changed so that the device can only be managed by one or a combination of two
management interfaces. To configure the management interfaces proceed as follows:
1. From the
Management
menu click the
Management Interfaces tab
to make a
selection from the
Services
field drop down list.
2. Click Apply
Figure 5-2 Changing Management Interfaces-Services
SUMMARY
