Parking Action Setup
This feature allows the camera to begin a specified action after a
Park Enable
[ON/OFF]
If Park Enable is set to ON, the camera runs an
command during the programmed "Wait Time".
Wait Time
[1~59 sec. / 1~180 min.]
Wait Time can be programmed from 1 second to 180 minutes.
Park Action
[HOME/PRESET/PATTERN/SWING/GROUP/PREV ACTION]
This feature defines the activity when the camera parks. If Park Action is set to
moves to the home position which is memorized when the system boots. If Park Action is set to
“PREV. ACTION”, the camera runs the previous action which it
Alarm Input Setup
Defines Alarm Function. When an alarm is receive, an input signal to the camera triggers the user
for the alarm.
Alarm No
[1~3]
Selects a sensor number to set up.
Type
[Normal OPEN/Normal CLOSE]
Selects sensor operation type.
Action
[NOT USED/PRESET/PATTERN/SWING/GROUP]
Selects an action to run when a sensor signal is input.
48
This feature allows the camera to begin a specified action after a programmed time of inactivity.
If Park Enable is set to ON, the camera runs an assigned function automatically if there is no PTZ
command during the programmed "Wait Time".
[1~59 sec. / 1~180 min.]
Wait Time can be programmed from 1 second to 180 minutes.
[HOME/PRESET/PATTERN/SWING/GROUP/PREV ACTION]
This feature defines the activity when the camera parks. If Park Action is set to
moves to the home position which is memorized when the system boots. If Park Action is set to
, the camera runs the previous action which it ran most recently.
Defines Alarm Function. When an alarm is receive, an input signal to the camera triggers the user
Selects a sensor number to set up.
OPEN/Normal CLOSE]
Selects sensor operation type.
[NOT USED/PRESET/PATTERN/SWING/GROUP]
Selects an action to run when a sensor signal is input.
time of inactivity.
assigned function automatically if there is no PTZ
This feature defines the activity when the camera parks. If Park Action is set to “HOME”, the camera
moves to the home position which is memorized when the system boots. If Park Action is set to
ran most recently.
Defines Alarm Function. When an alarm is receive, an input signal to the camera triggers the user-defined action programmed