25
DISTRIBUTION CABINETS
XL
3
S 160
4
FACEPLATES MOUTING (CONTINUED)
For the installation of control and
signalling units or devices with a voltage
U>50 V on the faceplate, it is necessary
to add an equipotential link conductor
between the faceplate and the cabinet.
To achieve this, you must bend the
connecting lug of the faceplate with
pliers.
Connect the conductor (Cat. No 3 397 53)
to the faceplate with a screw, a nut and
2 washers (not supplied) in order to
ensure the continuity.
The connection on the cabinet is made by
screwing a M6 nut (not supplied) on the
specified attachment points.
5
SIGNALLING
As well as the label-holders on all DIN
rail mounting equipment and the plastic
marking strip Cat. No 0 203 99, a clip-
on holder accessory is available for
24 modules (Cat. No 3 397 55) and 36
modules (Cat. No 3 397 56).
WWW.LEGRAND.COM
Summary of Contents for 3 372 02
Page 38: ...36 Notes...
