LEGRAND 3 372 02, Specifications

Page: 23 / 40

21 DISTRIBUTION CABINETS XL
3
S 160
2 FLUSH-MOUNTING
It’s only possible by fixing the cabinet in a masonry wall (cinder block, engineering/
plain brick and aerated concrete) or a partition in hard materials (partition brick,
precast plaster blocks and aerated concrete) associated to isolation in many cases.
Cabinets can be fixed using plaster, adhesive mortar or cement, as required.
■ Flush-mounting dimensions of the 24 and 36 modules cabinets
Cat. Nos A B C
24
modules
3 372 22 595 440
135
3 372 23 590 595
3 372 24 740 595
3 372 25 811 740
3 372 26 890 595
3 372 27 890 811
3 372 28 1040 595
36
modules
3 372 34 1040 811
135
3 372 35 1190 595
3 372 36 1190 811
3 372 37 1340 595
3 372 38 1340 811
The flush-mounting width must be expanded at the masonry anchors (+ 35mm in
width per anchor).
Dimension B + 70mm
The hole in the masonry wall must have a minimum depth of 135 mm.
The set par isolation must have a minimum depth of 135 mm, including a
minimum depth of 100 mm for the partition. (The anchors sealing is made at mid-depth
of the cabinet, i.e. approximately 70 mm).
WWW.LEGRAND.COM