22
FLUSH-MOUNTING
CABINETS
2
FLUSH-MOUTING (CONTINUED)
■
Cut of the cable entries
Knockout and cut the upper or bottom
side panel of the cabinets in order to run
the sleeves.
Masonry anchors mounting
Fit the masonry anchors which are
supplied with the cabinet (x 4) by using
the screws (x 8) and the M6 nuts (x 8)
supplied.
Screws at the back of the cabinet:
Nuts inside the cabinet:
■
Installation in the wall
Position the cabinet at level against the
wall and draw the outlines. The position
of the 4 fixing lugs can be made in the
same time:
Cut of the wall or the partition:
Fit the cabinet in the hole and insert all
sheaths.
Seal the lugs then, furnish around the
cabinet with some plaster, adhesive
mortar or concrete:
On the side panel of the cabinet, 2 marks
indicate the maximum and the minimum
depth for the flush-mounting (including
the finishing).
Max
depth
Mini
depth
Minimum depth:
Maximum depth:
Summary of Contents for 3 372 02
Page 38: ...36 Notes...
