7
ASSEMBLY
FIGURE 1
PIN
STEP 2
Extend the main power cord out head end of
base.
Set the hardware box aside. Cut the zip-tie
and remove the mattress retainer.
STEP 3
Screw the legs into the tapped holes at the (4)
corners (FIGURE 1).
STEP 4
Rotate the base in the bottom shipping carton onto
its edge, and then rotate the base over onto its legs.
Note the 4-port charging hub at head end of base
(FIGURE 2).
Push pin in to
adjust leg height
(6 inches to
10 inches).
DUE TO RISK OF INJURY, TWO ADULTS
"3&3&26*3&%50)"/%-&"/%.07&
ADJUSTABLE BASE.
WARNING
!
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
STRUCTURE.
WARNING
!
DO NOT ATTEMPT TO SCREW LEGS INTO
ANY OTHER INSERTS. THIS WILL DAMAGE
PRODUCT.
CAUTION
!
FIGURE 2
4-PORT CHARGING HUB
for charging low-voltage
devices only; hub is free-
TUBOEJOHPO4QMJU2VFFO
bases.
HEAD END OF BASE
