11
REMOTE CONTROL PROGRAMMING
- 1 REMOTE TO OPERATE 1 BASE
STEP 1
Unplug base for 30 seconds, then plug back in.
STEP 2
Remove the battery compartment door from the
remote control (FIGURE 6).
STEP 3
Place base on its side and locate the control box
(FIGURE 7).
STEP 4
Using a pointed object, quickly push the learn
button in two times (FIGURE 7). The underbed light
will come on.
STEP 5
Press and hold the LEARN SWITCH on the remote
control (FIGURE 6) until the underbed lighting goes
off.
FIGURE 6
LEARN
SWITCH
BATTERY
COMPARTMENT
DOOR
FIGURE 7
LEARN
BUTTON
CONTROL
BOX
STEP 6
Operate the remote control to verify the base
functions correctly.
