14
POWER DOWN OPERATION
Use this procedure to lower the base to flat during a power outage. Do NOT put batteries in power down device
until necessary for use.
Note: Power down device uses 9-volt alkaline batteries, which are not included.
STEP 1
Unplug base from electrical power supply.
STEP 2
Insert (2) 9-volt alkaline batteries into the power brick (FIGURE 15).
STEP 3
Press the HEAD DOWN BUTTON on the remote control until the head section is
flat. Press the FOOT DOWN BUTTON on the remote control until the foot section
is flat (FIGURE 16).
FIGURE 15
INSTALL (2) 9 VOLT BATTERIES
*BATTERIES NOT INCLUDED
UNDERSIDE OF
POWER BRICK
BATTERY
COMPARTMENT DOOR
(push down and slide off
to remove)
HEAD
DOWN
BUTTON
FOOT
DOWN
BUTTON
FIGURE 16
