Lectrosonics duet DCHT Instruction Manual Download Page 14

Page: 14 / 24

DCHT, DCHT/E01

LECTROSONICS, INC.

Selecting Battery Type

The voltage drop over the life of different batteries varies

by type and brand. Be sure to set the correct battery type

for accurate indications and warnings. The menu offers

alkaline or lithium types.

Setup...

BatType

Locked?

Backlit

BatType

Alk.
Lith.

If you are using rechargeable batteries, it is better to use

the timer function on the receiver to monitor the battery

life rather than the indicators on the transmitter. Re-

chargeable batteries maintain a fairly constant voltage

across the operating time on each charge and stop work-

ing abruptly, so you will have little or no warning as they

reach the end of operation.

Locking/Unlocking Changes to Settings

Changes to the settings can be locked to prevent inad-

vertent changes being made.

Locked?

Yes
No

-40

-20

Gain

A small padlock symbol will appear on adjustment

screens when changes have been locked.

Setup...

NameTx

Locked?

Backlit

When changes are locked, several controls and actions

can still be used:

•  Settings can still be unlocked.
•  Menus can still be browsed.
•  Programmable switch still works (Mute and On/

Off).

• Sync functions are still available (except Get Freq.

and Get All).

Selecting Backlit Time

Adjusts the duration of the LCD back light to 30 seconds,

5 minutes, or to remain on.

Setup...

BatType

Locked?

Backlit

On
30 sec
5 sec

Turning LEDs Off/On

Options to turn the control panel LEDs on or off.

Setup...

Backlit

LED Off

Default

LEDs

On
Off

Restoring Default Settings

This is used to restore the factory settings.

Setup...

Backlit

LED Off

Default

Default
settings

No
Yes

About

Displays model number and firmware

version.

TopMenu...

Key...

Setup...

About

About
DCHT

V1.15

/1.10

Summary of Contents for duet DCHT

























Search results

Summary of Contents for duet DCHT

Reviews:

Related manuals for duet DCHT

Brands by name

Popular brands

Lectrosonics duet DCHT, Instruction Manual

Search results

Summary of Contents for duet DCHT

Reviews:

Related manuals for duet DCHT

Brands by name

Popular brands