Lectrosonics duet DCHT Instruction Manual Download Page 13

Page: 13 / 24

Digital Transmitter

Rio Rancho, NM

Flex List

Name

Name the DCHT, DCHT/E01 to allow easy identifica-

tion on the M2R FlexList. The following are available for

custom names:

NameTx:

Name the DCHT, DCHT/E01

NameCh1:

Name Channel 1

NameCh2:

Name Channel 2

Use the UP and DOWN arrows to choose which

character you want and then MENU/SEL to move to next

space (there are 8 spaces available for each name). Press

BACK to save.
NOTE: Duplicate names are not allowed in a FlexList. Be

sure to choose unique names for Tx, Ch1 and Ch2.

NameTx

DCH

Cursor

Press the and

arrow buttons to select

the desired character,

press MENU/SELECT

to move to next space;

there are 8 spaces

available.

Sync DCHT, DCHT/E01 information to the M2R FlexList

either as one stereo Channel or individual channels:

SendTx:

Send (sync) all receiver information to

the M2R FlexList as one stereo channel
-

SendCh1:

Send (sync) Channel 1 unique infor-

mation to the M2R FlexList
-

SendCh2:

Send (sync) Channel 2 unique infor-

mation to the M2R FlexList
-

SendM12:

Send (sync) a mono mix of both

channels to the M2R FlexList

Use the arrow

button to begin sync

SendTx

Sync

SendCh1

Sync

Setup Menu

Selecting AutoOn Feature

If external power is switched off or batteries fail while the

unit is transmitting, the unit will automatically turn back

on after power is restored or fresh batteries are installed.

This function is enabled by selecting

Yes

in the menu

options.

Setup...

AutoOn?

ProgSw

Remote

AutoOn?

No
Yes

NOTE: AutoOn does not work when the

transmitter is in the

Standby

mode.

Selecting Programmable Switch

Functions

The programmable switch on the top panel can be con-

figured using the menu to provide several functions:

•

(none) -

disables the switch

•

Mute

- mutes the audio when switched on; LCD

will blink a message

•

Power

- turns the power on and off

ProgSw

Mute

Press the and

arrow buttons to select

the desired function or

disable the switch

Setup...

AutoOn?

ProgSw

Remote

NOTE: The programmable switch will continue

to operate whether or not keypad changes are

locked.

Enable/Disable Remote Control Function

The “dweedle tone” remote control is turned on or off

with the

Remote

menu, setting the transmitter to react to

tones received (

Enable

) or to

Ignore

the tones.

Setup...

AutoOn?

ProgSw

Remote

Enable
Ignore

NOTE: Remote control of settings is enabled

using a third party smart phone app named

DCHTRemote, published by New Endian, LLC.

Summary of Contents for duet DCHT

























Search results

Summary of Contents for duet DCHT

Reviews:

Related manuals for duet DCHT

Brands by name

Popular brands

Lectrosonics duet DCHT, Instruction Manual

Search results

Summary of Contents for duet DCHT

Reviews:

Related manuals for duet DCHT

Brands by name

Popular brands