background image

DCHT, DCHT/E01

LECTROSONICS, INC.

18

DCHTRemote

By New Endian LLC

DCHTRemote is a mobile application for iOS operat-

ing systems to remotely control the Lectrosonics DCHT 

Transmitter.
The app remotely changes settings on the transmitter 

through the use of encoded audio tones, which when re-

ceived by the attached microphone, will alter the config-

ured setting. The app is available for download and sells 

for about $25 on the Apple App Store.
DCHTRemote’s remote control mechanism is the use of 

an audio sequence of tones (dweedles) that are inter-

preted by the transmitter as a configuration change. The 

settings available in DCHTRemote are:

•  Audio Level (Gain)
• Frequency
•  Sleep Mode
•  Lock Mode
•  Output Power
•  Low Frequency Roll-off
•  LED on/off

Activation

For the DCHT to respond to remote control audio tones, 

the transmitter must:

•  The transmitter must not be turned off; it can how-

ever be in sleep mode.

•  Remote control must be enabled.

Please be aware this app is not a Lectrosonics 

product. It is privately owned and supported by 

New Endian LLC, www.newendian.com.

Summary of Contents for duet DCHT

























Reviews: