Lectrosonics duet DCHT Instruction Manual Download Page 11

Page: 11 / 24

Digital Transmitter

Rio Rancho, NM

TYPE

DESC, BIAS, IMPEDANCE, POLARITY

Line In

Line level signals up to +24 dBu

Dynamic

Low-Z dynamic microphones

PSA

Point Source Audio lav microphones

DPA

DPA lavaliere; 4V, Mid-Z, (+)

Countryman B6; 2V, Low-Z, (+)

COS-11

Sanken COS-11; 4V, Low-Z, (–)

MKE 2*

Sennheiser MKE 2; 4V, Low-Z, (+)

M152*

Lectrosonics M152; 4V, Low-Z, (+)

Oth Lav*

Other lavaliere; 4V, Low-Z, (+)

Custom

Manually configurable microphone level

* Separate listings for these microphones are included for

convenience, however, they are all the same configura-

tion.
The

Custom

option opens a setup screen that provides a

variety of settings. Press SEL to select the custom setup

item, then press the and arrow buttons to adjust

the setting.

InpCfg2

Custom

MicLoZ

0V Neg

Channel select

Input impedance

Bias voltage

Audio polarity

Available settings:

•  Input impedance (Z): LOW, MID, HIGH
•  Bias voltage: 0V, 2V, 4V
•  Audio polarity: + (pos.), – (neg.)

Xmit Menu

Selecting Frequency

The setup screen for frequency selection offers multiple

ways to browse the available frequencies.

Xmit...

Freq

TxPower
Rf On?

Freq.

494

.500

Grp 4

Freq.

494.

500

Grp 4

Press the MENU/SEL button to select each field. Use the

and arrow buttons to adjust the frequency. Each field

will step through the available frequencies in a different

increment, or select the Frequency Group.

NOTE: When the frequency is highlighted, hold

down the MENU/SEL button to increase or

decrease frequency in higher increments.

Selecting Transmitter Output Power

The output power can be set to 10 mW, 25 mW

or 50 mW.

Xmit...

TxPower

Compat

Rf On?

TxPower

10 mW
25 mW
50 mW

Turning Rf On/Off

Turn Rf off to preserve battery power while setting other

transmitter functions. Turn it back on to begin transmit-

ting.

Xmit...

TxPower

Compat

Rf On?

Yes
No

NOTE: When transmitter is off, a brief press of

the Power Button will turn the transmitter on

with Rf off. Use this function to turn Rf on when

ready to transmit.

Compatibility Mode

Selecting Receiver Compatibility Mode

The transmitter can be set to operate with different re-

ceivers:

Duet:

M2R digital IEM/IFB receiver

DCHX:

DCHR and

M2R-X encrypted (FW v3.x)

TopMenu

Input

Xmit

Compat

Duet
DCHX

Summary of Contents for duet DCHT

























Search results

Summary of Contents for duet DCHT

Reviews:

Related manuals for duet DCHT

Brands by name

Popular brands

Lectrosonics duet DCHT, Instruction Manual

Search results

Summary of Contents for duet DCHT

Reviews:

Related manuals for duet DCHT

Brands by name

Popular brands