Chapter 8: Decode Requests
USB
MobileHS
User Manual
86
LeCroy Corporation
Mapping Endpoint RPipe to Class/Vendor Decoding
To assign a Class/Vendor Endpoint RPipes decoding:
Step 1
Click the
Apply Decoding Scripts
button on the Toolbar.
OR
Left-click the
Bulk/Int Transfer
field to display the USB Device Request menu.
Step 2
Select
Map Endpoint RPipe
to Class/Vendor Decoding
to display the Request
Recipients and Endpoints dialog box.
Step 3
Click the
Endpoint RPipes
tab to display the Endpoint RPipes dialog box:
The RPipe field shows all RPipes found in the trace file. The displays shows the
Otg Host, HWA address, and Direction for the recipient. On the right are the
names of Class/Vendor Endpoint Decoding groups currently assigned to
endpoints. If blank, no decoding is assigned for a recipient.
Step 4
Select an endpoint RPipe.
Step 5
Display the
Class/Vendor Endpoint Decoding
drop-down menu. The
Class/Vendor Endpoint Decoding options are the same as for Endpoints.
Step 6
Select the type of decoding.
OR
Select
No Decoding
if you do not want any specific decoding.
Step 7
Repeat the previous steps for any additional RPipes you would like to map.
Step 8
To retain a mapping from trace to trace DURING an application session, select
the
Keep Across Recordings
checkbox.
Step 9
Click
OK
.
Summary of Contents for USB Mobile HS
