LeCroy USB Mobile HS User Manual Download Page 46

Page: 46 / 154

Chapter 5: Reading a Trace

USB

MobileHS

User Manual

LeCroy Corporation

5.7 Pop-up Tool-tips

Many trace fields display pop-up tool-tips that provide added details about the field when
the mouse pointer is suspended over them.

5.8 Hide SOF Packets

You can hide Start-of-Frame (SOF) packets that may be uninteresting in a given context
from a Trace View by clicking the Hide SOF Packets button on the Tool Bar:

•

Click

to hide all SOF packets.

Note:

If you have enabled

2-Stage SOF Hiding

in the General Display Options

then the Hide SOF button works in two stages. Click once to hide all SOFs
that begin frames with no USB traffic. Click twice to hide all SOFs.

5.9 Hide NAKs

You can hide NAKs that may be uninteresting in a given context from a Trace View by
clicking the Hide NAKs button on the Tool Bar:

•

Click

to hide all NAK packets.

5.10 Hide Devices

Click the

button to get a window that allows you to select any address/endpoint

combination to be hidden.

5.11 Hide Chirps

Click the

button to hide any Chirped-J or Chirped-K packets recorded in a USB

trace.

Summary of Contents for USB Mobile HS



























































































































































Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands

LeCroy USB Mobile HS, User Manual

Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands