LeCroy USB Mobile HS User Manual Download Page 134

Page: 134 / 154

Chapter 11: Updates

USB

MobileHS

User Manual

126

LeCroy Corporation

11.2 Software Updates

When a new software release is available, it is posted on the Support page of the LeCroy
website at

www.lecroy.com/support.html

To update the software:

Step 1

In the

About USBMobile

HS screen, verify which version of USB

Mobile

Software you are currently running.

Step 2

Find the latest released software version on the LeCroy website under

Support

If you are running the latest version of the software, no further action is
needed.

If you are

not

running the latest version, continue to Step 3.

Step 3

Download the Zip files from the website.

Step 4

Unzip the files into your choice of directory.

Step 5

Click

Start

, then

Run

, and browse to where you unzipped the files.

Step 6

Select the program named

Setup

and click

Open

Step 7

Click

to run the Setup and begin the installation.

Step 8

Follow the on-screen instructions to complete the installation.

Step 9

Read the Readme file for important information on changes in the release.

11.3 BusEngine and Driver Updates

The Bus Engine and driver updates are done automatically during software installation.
No user interaction is necessary or possible.

11.4 License Information

You can view license information for USB

Tracer/Trainer

by selecting

Display License Information

from the Help menu. The License Information window

indicates the maintenance expiration data for USB

Tracer/Trainer

. It also provides a list of

the named features supported by the current software version.

Named features enabled on your PC are indicated by

Yes

in the Purchased column.

Named features that are not enabled on your PC are indicated by

in the Purchased

column. Whether or not named features are enabled depends on the license key stored
in your analyzer.

If you try to use a feature for which you do not yet have a license, the program displays
the License Protection Message. Named features that are not enabled on your PC are
indicated by

in the Purchased column. To use the feature, you must purchase a

license.

Summary of Contents for USB Mobile HS



























































































































































Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands

LeCroy USB Mobile HS, User Manual

Search results

Summary of Contents for USB Mobile HS

Reviews:

Related manuals for USB Mobile HS

Brands by name

Popular brands