LeCroy USB Mobile HS, User Manual

Page: 33 / 154

USB MobileHS User Manual Chapter 4: Software Overview
LeCroy Corporation
25
Recording Status
During recording, the current Recording Status is displayed in the next segment. When
you activate the
Record function, this segment flashes one of the following messages
(depending on the selected Recording Options):
• Trigger?
• Triggered!
• Uploading
After recording stops:
• The flashing message changes to Uploading data– x % done. (x% indicates
the percentage completion of the data uploading process.)
• The traffic data is copied to disk into the default file data.usb (or whatever file
name you have specified in the Recording Options dialog box).
To abort the upload process:
• Press Esc on your keyboard or click in the Tool Bar. You are asked if
you want to keep or discard the partially uploaded data. While uploading is in
progress, clicking the
Stop button again brings up a dialog with four options:
• Full Buffer/Upload Selection : Allows you to decide how much of the
buffer to upload. Use the slide bar to set the range to be uploaded.
• Stop : Ends the upload process and preserves whatever part of the
recording has been uploaded.
• Continue : Resumes the upload process.
• Flush : Empties the uploaded trace from the current file.