LeCroy Advisor, User Manual

Page: 144 / 174

Chapter 11: Recording Options USB Advisor User Manual
136
LeCroy Corporation
11.9 Recording Bus Data
Note: If you have inserted any event triggers, be sure to select Event Trigger under the
General tab in the Recording Options dialog box.
To start recording USB traffic after setting the appropriate Recording Options:
Step 1 Select Start under Record on the Menu Bar.
OR
Click on the Tool Bar.
Your recording session can continue until it has finished naturally or
you may need to stop manually by clicking on the Tool Bar, depending on how you
set the Recording Options.
To manually stop recording:
Step 2 Select Stop under Record on the Menu Bar.
OR
Click on the Tool Bar.
Note: The manual Stop Recording feature is primarily of use when recording
low-speed traffic, which can take a long time to fill the recording buffer.
While uploading is still in progress, hitting the stop button opens a dialog that contains
the following options:
• Partial Upload (loads only a portion of the trace)
• Flush current file
• Keep only what was uploaded so far
• Continue uploading
When the recording session is finished, the bus traffic is saved to the hard drive as a file
named
data.usb or whatever name you assign as the default filename.
To save a current recording for future reference:
Step 3 Select Save As under File on the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.
Step 4 Give the recording a unique name and save it to the appropriate directory.