LeCroy Advisor, User Manual

Page: 25 / 174

USB Advisor User Manual Chapter 3: Quick Installation
LeCroy Corporation
17
Step 3 Select the General tab to open the General page of the Recording Options dialog
box, showing factory default settings such as Snapshot and 1 MB buffer size. For
the first recording, leave these settings unchanged.
Step 4 Click OK to activate the recording options you selected.
Step 5 Turn on the USB devices that are to be tested and cause them to generate USB
traffic.
Step 6 Click on the Tool Bar.
Advisor starts to record the USB traffic immediately. After 1 MB of traffic is
recorded, the Analyzer uploads the data and displays the packets in the trace
window.
Step 7 If you wish to terminate the recording before the snapshot
automatically completes, click on the Tool Bar.
When the recording session is finished, the traffic is uploaded from the Analyzer
to the hard drive on your PC as a file named
data.usb or whatever name you
assigned as the default filename. While the file is being uploaded, you should see
a brown progress bar at the bottom of the screen. When the bar disappears, it
indicates that the data has been uploaded to disk.