9
www.leantechnik.com
5
Technical data
5.1 Notes
5.1.1 Conditions of use
• Mounting and connection dimensions at the place of use
must be matched to the size of the brake.
• The use of the brake under extreme environmental
conditions or outdoors with direct contact with
weather influences is not permitted.
• The surfaces of the exterior components are provided
with a phosphate coating in the factory, which ensures a
corrosion protection base.
• The provision of the required operating pressure
must be guaranteed.
5.1.2 Ambient temperature
-10 °C to +60 °C
The technical data refers to the
specified temperature range.
5.1.3 Protection class
(mechanical) IP44: When installed, protected against sol-
id foreign bodies with a diameter of >1 mm and against
splashing water on all sides.
5.1.4 Noise emissions
Generally no noise emissions
5.1.5 Installation location
The stepless holding brake (SHB) can be used in any
installation position.
5.1.6 Requirements for the use of the product
Compare the limit values in these
operating instructions with the current application, e.g.
• Pressure
• Clamping forces / braking forces
• Braking distances
• Masses
• Temperatures etc.
• Pressure medium
The indicated values are guideline values which have
been determined in test facilities. The suitability for
the intended application must be determined, if nec-
essary, by independent testing. When designing the
brakes, the installation situations, permissible friction
work and braking distances as well as ambient con-
ditions must be carefully checked and coordinated.
i
5 Technical data
