20
www.leantechnik.com
8 Installation
8.2 Installation
8.2.1 Prerequisite
•
Unpack the brake
•
Check completeness
•
Check the details on the type plate
•
Visual inspection (e.g. after prolonged storage)
8.2.2 Preparation
•
Have the necessary tools ready:
- Open-end wrench, etc.
- Torque wrench
•
Observe the required minimum thickness of the customer's
mounting flange (dimension U).
•
Have fastening screws ready (not included in scope
of delivery)
All tightening torques are recommendations. This information
does not release the user from
checking the data in relation to the installation situation.
8.2.3 Installation process
1. Remove the screw plug from the desired pneumatic con-
nection (J)
2. Connect the pneumatic hose via the thread on the pneu-
matic connection
(J) to the brake
3. Load the brake with operating pressure. See Technical
data.
4. Unscrew the transport lock (K) and
remove it
6. Push the brake onto the profile rail.
7. Screw in the fastening screws (without
torque).
8. Screw locking with Loctite 243
9. Depressurise the brake and thus tension it
(centring).
10. Tighten the fastening screws with tightening torque
Nm.
11. Apply pressure to the brake.
12. Depressurise the brake again (pressure relief).
13. Tighten the fastening screws with tightening torque
!
!
!
!
i
CAUTION Observe the dead weight of the
brake: When lifting / dismantling, the
brake may drop. Crushing
and impacts may result.
With wipers (optional), the
connections m3 and m4 cannot be used.
CAUTION Load crash possible
The brake has no function when the transport
locks are screwed in. The transport lock (red
screw head) must be removed.
ATTENTION Close the brake only with the
guide. The brake must be pushed onto the pro-
file rail.
ATTENTION Brake may be damaged
Removing the transport lock when the brake
is depressurised will result in damage. Only
remove the transport lock (red screw head)
when pressurised.
Size and tightening torques of the fastening screws
Size
Thread
T i g h t -
e n i n g
torque
Strength
class
M a x .
screw-in
depth B
5.0
5.1
5.3
6 x M12
6 x M16
6 x M24
109 Nm
260 Nm
900 Nm
10.9
10.9
10.9
21.7 mm
27.7 mm
43 mm
