Leader LV 5490, Instruction Manual

Page: 62 / 140

5. BASIC OPERATION
53
5.1.2 Measuring SD, HD, 3G-A, and 3G-B-DL Signals
1. On the SDI IN tab in the system settings, set SDI System to SD/HD/3G-A/3G-B-DL.
SYS 1 SIGNAL IN OUT
Figure 5-2 SDI IN tab
2. If the input signal is HD or 3G, set the payload ID.
Select Use or Not Use. If you select Not Use, specify the following settings.
3. Press
Select Input to apply up to eight signals (1A to 1D and 2A to 2D).
Select Output to apply up to four signals (1A to 1D). (2A to 2D are set to output.)
SYS 1 SIGNAL IN OUT 3 NEXT TAB
Figure 5-3 SDI OUT tab
USO
RESTRITO