Leader LV 5490, Instruction Manual

Page: 114 / 140

7. CAPTURE FEATURE
105
7.2 Frame Capture
Use the frame capture feature in single input mode. It will not work properly in simul mode.
7.2.1 Capturing Frame Data
There are two ways to capture frame data. One way is to capture frame data manually, and
the other is to capture frame data automatically when errors occur (error capture).
1. Display the screen you want to capture.
The display must be showing video signal waveforms, vector waveforms, or a picture.
However, capturing is not possible if an eye pattern (SER02) or audio (SER03) is shown
in the same display.
2. Press CAP.
The CAP menu appears.
Unlike screen captures, frame data is not captured when you press CAP.
CAP
Figure 7-7 CAP menu
Capturing frame data manually
3. Press TRIGGER to select MANUAL.
4. Press 2 REFRESH.
One frame of data is captured in the LV 5490.
USO
RESTRITO