Leader LV 5490, Instruction Manual

Page: 107 / 140

6. SYSTEM SETTINGS
98
6.7 Initialization
To initialize the LV 5490 settings and layout, use 7 INITIALIZE in the SYS menu.
SYS 7 INITIALIZE
Figure 6-12 INITIALIZE menu
6.7.1 Initializing Settings
To initialize the settings, press PARAM INIT YES. To cancel, press 5 INIT CANCEL.
(ETHERNET SETUP tab)
Remote settings (REMOTE SETUP tab)
(DATE&TIME tab)
Factory Default Settings
If you also want to initialize the above settings (excluding the date and time settings), turn
on the power while holding down the V POS and H POS knobs. Release them when about
3 seconds (after the key LED switch from bright to dim) elapse after the power is turned on,
and then press
SRAM/FLASH INIT YES.
Figure 6-13 Factory default settings
USO
RESTRITO