6
1. Procedure of the TINY-FOGGER
The TINY FOGGER is a battery-operated, microprocessor-controlled mini fog
generator. It is based (as are most fog generators) on the vaporizer principle, i.e.
a glycol fluid is evaporated and condenses into fog when leaving the fog nozzle.
However, the TINY-FOGGER only heats when fog is actually needed.
It uses only 20 milliamperes in idle status and consequently it may remain
connected to the the battery for several hours with no discharging to speak of.
When emitting fog a strong current of 5 to 6 AMP runs with peak levels of 12 to
13 AMP.
The following sequence produces fog:
a) Warming up (1 second, without pumping fluid).
b) The pump runs between 1 second and 2 minutes – depending on application.
c) Heat again (15 seconds without pumping any fluid).
During the phases a and c a new start of the fogging process is possible. Just
press the gray start/program button.