10
3. Operating the TINY-FOGGER
3.5 Programming the fogging time
3.6 Battery Status Display
The yellow light-emitting diode (LED) on the TINY-FOGGER indicates how strong/
efficient the battery still is and/or when it must be recharged.
1) LED flashes slowly:
Battery capacity of 15% – 100 %,
the battery is fully operational.
2) LED flashes fast:
Battery capacity below 15% –
the battery should be changed and/or charged.
3) LED lights up permanently:
the battery is flat.
or: the Vaporizer is damaged (see point 6.1)
For some applications it will be useful to program in a fixed fog amount, which
can be easily reproduced later. To program a fogging duration, use the blue button
[11] at the back of the machine.
The blue button must be pressed and held down until the desired fogging time
is achieved – then release it. This programmed fog amount can then be reproduced
by briefly pressing the button on the control panel or the topmost button on the
receiver of the radio remote. You can reproduce the programmed fog amount in
this manner as often as you like. The programmed fogging duration will remain
in memory until you program a new one in the above manner.
If you wish to control the fogging time manually, with no programmed fogging
duration whatsoever, then press the blue button once briefly. Now the machine
will produce fog for as long as you press the button on the control panel or the
transmitter of the radio remote.
Socket for connecting
the cable of the control
panel or the receiver of
the radio remote
(11) Switch for programming
the fogging time and for
calibrating a new vaporizer
Yellow LED
(Battery status display)
