background image

lemaitrefx.com

15

Pro Beam (Long Lasting) Fog Fluid

: We have had many compliments on our fog fluid but

many of our customers would like it to hang longer so we introduced the “Long Lasting
Fluid”.  It is still odourless but a little less white than our “Director’s Choice”.  It hangs in the
air 2 - 3 times longer than the “Director’s Choice”.

Quick Dissipating Fog Fluid

: We have been mixing this for some time for our special effects

people working in the movies.  We have decided that there are many other applications for
this fluid.  When using this in the LSX or LSG, you will find it works very well if you are having
problems with the smoke rising too quickly.  It has also been used for quick burst-of-steam
effects, nitrogen bursts, etc.  It will dissipate at about twice the rate of the “Molecular Fluid”.

Extra Quick Dissipating Fog Fluid

: It is very similar to the “Quick Dissipating” but dissipates

at about twice the rate of the “Quick Dissipating”.

Molecular Fog Fluid

: The “Molecular Fluid” was originally designed for use in the LSG and

LSX, however, many other applications were found very quickly.  It is clean, white, thick fog,
practically odourless and dissipates as it begins to warm.

Maxi Fog Fluid

: Maxi Fog Fluid was developed for our high volume users requiring an

excellent balance of price and performance without compromise.

Directors’s Choice Fog Fluid

: This fluid has been our long standing blend.  It is a clean, white,

practically odourless fog.  It is used for many applications where a cloud of fog is required
with a medium hang time.

All of our Fog & Haze Fluids are water based and leave NO residue.  The G300 must always be
in Haze Mode when using Haze Fluids.  Permanent damage will occur if Haze Fluid is used in
the Power Fog Industrial for any length of time.

Recommended Fluids

EZ Kleen Preventative Maintenance Fluid

: EZ Kleen is used as a preventative maintenance

measure to ensure longer heat exchanger life. It is easy to use and should be used on a
regular basis to prevent blockage of your heat exchanger that frequently happens to fog and
haze machines.

Regular Haze Fluid

: The “Regular Haze Fluid” is a water based formula, and gives a quicker

result with less operation time of the G300.  Ideal for medium size rooms and cutting down
on operational costs.

Never use Neutron Haze Fluid in your G300!

Summary of Contents for G300





















Reviews: