lemaitrefx.com
14
7.) The second connection to be made is the CO2 supply hose.
This is connected to the liquid port of the CO2 supply. A washer
is necessary to prevent leaks and are available from your gas
supplier.
8.) A LSG Low requires a 350 Lb. Low Pressure Dewar. You must
connect the supply hose to the Liquid output of the dewar. This
is usually clearly indicated on the dewar outputs. The dewar
pressure as indicated on the pressure gauge must read between
300 - 340 psi to operate the LSG, this is achieved by
opening the pressure builder valve at least one hour in advance
of use. A LSG High requires high pressure CO2 bottle.
These are normally available in 20 or 50 lb. sizes. For ease of
use it is recommended that bottles with liquid siphon tubes
be used. If these are unavailable simply invert the bottle to
obtain a liquid supply.
9.) Tighten the CO2 supply fitting snug with appropriate wrench .
10.) When the G300 Fog machine is up to operating temperature,
activate the 'Smoke' button on the remote control. The CO2 will
be activated, after the appropriate delay time passes smoke
issue will start. Verify cool temperature output waving your hand in the
outlet fog,and feeling for cool temperature..
Controlling the LSG with DMX
When controlling your G300/LSG with a G300 DMX Interface, the delay feature for purging
the supply hose is not available. We recommend using the DMX/LSG interface to control the
LSG, this will allow full delay flexibility between the G300 and LSG.
Note:
