70
2. Fix the screws (c) through lower fixing bracket with screwdriver
3. Please refer instruction manual Page 10 for how to fix the top fixing bracket
It add left limited block and right limited block on wine cooler
1. Fix the left limited block and right limited block on wine cooler left side and right side by 3
screws
2. Push the wine cooler into
kitchen cabinet
3. Fix the left limited block and right limited block on kitchen cabinet by 3 screws
Connecting the power supply
Your cabinet is designed for operation with 230 V single-phase.
It must be connected to a wall socket equipped with earthing and protected by a 10 A fuse in
compliance with the standard NF C15-100 and in compliance with your electricity supplier's
prescriptions.
SPECIFIC INFORMATION
-
We recommend that you install your wine cabinet in a temperate room.
-
If the inside light remains on, please note that the inside temperature will be higher.
-
Temperature inside the wine cabinet may vary depending on the type and the number of bottles
contained.
-
In order to keep your wines at a stable temperature, avoid leaving the door open for long periods.
-
Do not install your wine cabinet close to a heat source; avoid direct sunlight.
-
In order to guarantee your safety, and to prevent your wine being spoilt, do not place the cabinet in
humid locations.
-
Do not store perishable foodstuffs inside your wine cabinet.
-
The wine cabinet is not designed for use in a garage, outside, or in the open air.
