75
“
” Button
Used to down the temperature 1
℃
;
Setting The Temperature Controls
The temperature range can be set as low as 5°Cor as high as 20°C to suit your specific storage
requirements.
When the system enter the set up temperature. Each press once the
or
button, the
temperature setting will increase or lower 1
℃
,When the temperature setting reach the upper limit
18ºC and lower limit 5ºC, the temperature setting will not increase or lower.
If you want to know the actual temperature, please press
or
for 3 seconds, display panel will
show actual temperature. After 5 seconds, it will show the setting temperature.
Flashing word
= Cooler Temperature
Steady word
= Set Temperature
For LB 555/LBN 555
This is LCD touch panel.
“
”
Button
To control the inner light turn on/off.
(Press this button, the light is on, and the light is not controlled by door.)
NOTE:
It will take 3 seconds for LED light completely went out after turning off the light.
If you want the LED light to remain on continuously, this is possible. Please press and hold the
"
" button for 5 seconds, the display will show "LP".After 4 seconds the display will revert back to
normal and the light will remain on until manually switched off.
If you want to revert back and conserve energy (recommended), please press and hold the "
"
button for 5 second, the display will show "LF",after 4 seconds the display will revert back to normal,
and the light will automatically switch off after 10 minutes.
“
”
Button
To control this appliance turn on/off.
Press this button, the power is on. Press this button with 3 seconds again, the power is off.
NOTE:
It will take 3 seconds for LED light completely went out after turning off the light.
“
”
To shows the temperature of the internal cooler.
“
”
Button
The button control upper compartment setting temperature. When you press this button, the setting
temperature will decrease 1
℃
.
“
” Button
The button control lower compartment setting temperature. When you press this button, the setting
