LDA Audio Tech LDAVAP1, User Manual

Page: 25 / 28

If the "EMIC" Microphone fault indicator remains on, check that the emergency microphone
is properly connected to the VAP 1. To do so, unscrew the lock ring, disconnect and reconnect it,
and push the "RST" button.
If after reconnecting it turns on again, do a RESET (the equipment will have to be
reconfigured). To do so, push simultaneously the "ACK", "RST" and "TEST" keys for 5 seconds.
The equipment will restart. Set the equipment address according 4.2.
If none of the above works, contact the support/repair service. Press the "ACK" button to
silence the audible warning. The other functions of the VAP 1 as recorded messages broadcasting
will not be affected.
7.6 EXPANSION KEYBOARDS DO NOT ADDRESS THE ZONES
If when pressing a zone memory some zone memory indicators light up in different
keyboards, the identifier of one of them is not correct or coincides with another expansion
keyboard. Check the identifiers according to section 2.2.10.
If the problem is not solved, check the connection between the VAP 1 and the expansion
keyboards as indicated in section 4.5.
If none of the above has solved the problem, do a RESET (the equipment will have to be
reconfigured). To do so, push simultaneously the "ACK", "RST" and "TEST" keys for 5 seconds.
The equipment will restart. Set the equipment address according 4.2.
In case that the expansion keyboard does not work yet, disconnect it from the VAP 1 and
contact the support /repair service.
7.7 THE EXPANSION KEYBOARD DOES NOT LIGHT UP
If when pressing a zone memory of one or some expansion keyboards the indicators do not
light up, one of the expansion keyboards might be damaged.
Check the connection between the VAP 1 and the expansion keyboards as described in
section 4.5
If the problem is not solved, disconnect the equipment power supply for a few minutes and
check the keyboards from the last to the first one. Disconnect the first expansion keyboard that
does not light up and attach the rest to the VAP 1. If necessary, reconfigure the address according
to 2.2.10 and the content of the zone memories with the system configuration application and
contact the support/repair service.
8 MAINTENANCE INSTRUCTIONS
The equipment requires a reduced periodical maintenance.
The pe
riodicity of the maintenance must be adjusted in function of the condition of
installation of the equipment. It is advisable to establish a maximum period of time of one year.
Warnings:
•
Use only a soft lint-free cloth
•
Disconnect the equipment from any external power source.
•
Disconnect all external devices.
•
Keep away from liquids
•
Do not use aerosol sprays, solvents, or abrasives.
•
Do not spray cleaner directly on the device
LDA Audio Tech - Severo Ochoa, 31- 29590 MALAGA, SPAIN. Tel: +34 952028805 www.lda-audiotech.com/en
19
User’s Manual: VAP 1