LDA Audio Tech LDAVAP1, User Manual

Page: 12 / 28

2.2.10 KEYBOARD IDENTIFICATOR
The keyboard identifier is only available in expansion keyboards attached to the VAP 1. "ID"
is located in the middle of the base of the equipment. It allows to choose the position of the
expansion keyboard in the set. Each keyboard must have a unique identifier. In a system where
zone memory keys have not been configured, the zone that each expansion keyboard will take is
determined by the selected identifier. So we have:
•
ID 0: Memories 1-8
•
ID 1: Memories 9-16
•
ID 2: Memories 17-24
•
ID 3: Memories 25-32
•
ID 4: Memories 33-40
•
ID 5: Memories 41-48
•
ID 6: Memories 49-56
•
ID 7: Memories 57-64
•
ID 8: Position not allowed.
•
ID 9: Position not allowed.
2.3 INPUTS AND OUTPUTS
To access the inputs and outputs of the equipment and make the connections, remove the
four M3 screws that attach the cover to the rear part of the equipment. The cover has a rubber
membrane that can be perforated to allow the cables or tube to get through.
6
www.lda-audiotech.com/ en
Illustration 4: Keyboard identificator