LDA Audio Tech LDAVAP1, User Manual

Page: 16 / 28

3.2.3 STOPPING VOICE WARNING
To stop the issuance of a warning voice, in case it is a recorded message, push the button
of the message that hat you want to stop. To stop the live voice warning release the "Talk" button
on the microphone.
You can also stop issuing the condition by deactivating the emergency condition (see 3.2.4)
3.2.4 DEACTIVATING EMERGENCY CONDITIONS
If you want to deactivate the emergency condition, press “RESET” for 2 seconds, the
emergency condition will be deactivated. All the emergency warnings will be stopped.
3.2.5 EVENT LAUNCHING
You can launch events that have been configured in the NEO system. In order to do this,
extension panels for event launching should be previously installed.
How to use programmed events:
To launch an event, push the EVENT button. The keyboards’ leds flash for a few seconds to
indicate that you have to select the appropriate button. Then the pushed button’s led flashes in
green, pointing out that the order has been processed. If it can’t be processed, the REMOTE led
will flash, indicating that it’s not possible to execute it.
For you to be able to stop the launched events, it’s recommended to create an output
condition trigger and associate it to an unassigned button.
3.3 FAULT
3.3.1 MUTING FAULT CONDITION
If you want to silence the audible fault indicator, press the "ACK" button. The audible
indicator will also be automatically muted when you press the "TALK" button on the emergency
microphone.
3.3.2 RESETING FAULT CONDITION
To reset the fault condition press the "RESET" key for 2 seconds, the equipment will restart
the fault condition. If the fault condition persists, it will be indicated again.
3.4 TESTING
To do a test of the equipment indicators, hold the "TEST" key. All indicators will light up
simultaneously and the audible indicator will sound. To stop the test, release the "TEST" key.
10
www.lda-audiotech.com/ en