LDA Audio Tech LDAVAP1, User Manual

Page: 19 / 28

•
Push and hold the "ALERT" and "EVAC" buttons for at least 3 seconds.
•
Access to the configuration is confirmed when the "POWER" button lights up
•
If the function is activated, the "EMIC" indicator will remain on.
•
To activate or deactivate the warning tone, press the "TEST" button. Each tap will indicate
whether the tone is active by activating or deactivating the "EMIC" indicator.
•
Push the "ACK" button to confirm; "RST" to cancel the change.
4.4.2 CONFIGURATION. OUTPUT VOLUME
To access the output volume setting, proceed as follows:
•
Make sure the equipment is not in a condition of emergency. The "EMG" indicator will be
off.
•
Push and hold the "ALERT" button and "EVAC" button for at least 3 seconds
•
The access to the configuration will be confirmed by the blinking light up of the "POWER"
indicator.
•
Push the "EVAC" button to increase the volume and the "ALERT" button to decrease the
output volume. Each tap will be accompanied by the lighting up of the associated indicator
as confirmation. When the maximum or minimum volume is reached, the "EVAC" or
"ALERT" indicators will remain on.
•
Press the "ACK" button to confirm; "RST" to cancel the change.
4.5 EXPANSION KEYBOARDS CONNECTION
The VAP 1 can equip up to 7 expansion keyboards with 8 zone memories each one. To
connect the expansion keyboards, it features a port on the side that allows the installation on the
right side of the main unit.
To install, proceed as follows:
•
Disconnect the VAP 1 from the bus and its power supply, whether it is supplied from the
ACSI bus or locally (see chapter 4.1)
•
Place the adapter (supplied with the expansion keyboard) on the side port and match the
sides of both equipments until the electrical connection is complete. Illustrations 11, 12 y 14
•
Turn over both equipments together and screw the connecting metal piece that blocks the
bodies of both equipments (provided). illustration 13.
•
Set the expansion keyboard ID as described in section 2.2.10.
•
Reconnect the VAP 1 to the system. By default, the new keys will take the zones of the
system as described in section 2.2.10.
LDA Audio Tech - Severo Ochoa, 31- 29590 MALAGA, SPAIN. Tel: +34 952028805 www.lda-audiotech.com/en
13
User’s Manual: VAP 1