3
How the PIR motion detector functions:
When an object is detected, the connected module sends out a long command
(standard: key B4). The long command will only be sent once, even when the movement
lasts a very long time.
5 seconds after the movement has ended the LCN-GBL triggers off the release command.
If the movement lasts longer, the release command will come approx. 8 seconds after the
last movement.
Detecting range:
When needed four LCN-GBL´s can work on one module: for this every LCN-GBL must be
coded, so every PIR motion detector works on ist own key. Here you have to seperate the
marked circuit paths (see table and illustration on page 4).
LCN-GBL
Installation guide
Local Control Network
®
