Letting the PIR motion detector work on other keys
Through separating the circuit path, the light sensor will be
deactivated. Then there is only one light sensor per
module active!
The key B4 is reserved with the integrated motion detector.
As a result the fourth threshold cannot be used.
Additionally a binary sensor LCN-B3I can be connected to
the same LCN module.
The LCN-BT4H/-BU4L (4-way binary sensors) cannot
always be used on the same module.
(check the key mapping first!)
thumb rule: maximum 4 LCN-GBL´s on the I-connection
are allowed!
separable circuit paths
(0=separated circuit paths)
A B key light
1 1 B4 R2-Var
0 1 B5
deactivated
1 0 B6
deactivated
0 0 B7
deactivated
A
B
LCN-GBL
Local Control Network - building controls in perfection
4
®
Installation guide
