40
Wyvern Timer 2000R Operating Instructions
Interrogation Menu
Selection
Code
Description
See page number
00
Total money in hundreds of
base currency
29
01
Total money in units of base
currency
29
02
Total money in hundredths of
base currency
29
03
Total time in hundreds of
minutes
28
04
Total time in minutes
28
05
Total time in seconds
28
Display Messages
Message
Description
See page number
A Add
money
2
ACC Card
accepted
32
CARD
Valid card inserted
32
COOL
Fan is running
18
E5P
Emergency Stop pressed
25
L
Lockout is activated
19
LOC
Lockout time exceeded in card
mode
32
P
In pretime/wait time
17
PL
In matchplay mode
25
PROG
In programming mode
11 onwards
STOR
Timer is storing information
11 onwards
DPL (
Washing Machine Control). The DPL is designed for washing machines that do not allow
the door to be opened when there is no power applied to the washing machine. A problem can
occur if the user leaves the laundry room and does not return until after power has been
disconnected by the Wyvern 2000REM. To overcome this situation the coin timer re-applies
power for one minute to allow the door to be opened when the EM button is pressed. If the user
is present at all times and opens the door before the Wyvern 2000REM disconnects power then
the pushbutton is ignored until another coin time has been initiated. The EM button is ignored if
pressed during a timing cycle or if the display shows zero. If coins are inserted before the EM
button is pressed then a complete washing cycle is initiated.
Sequence
Start timing sequence with coins or smart card.
Select washing program. At end of time period with power disconnected the display flashes
“door”. User presses EM button, power is re-applied for one minute allowing door to be opened.
During this time the display flashes “L” and any coins are rejected.
After one minute display reverts to zero ready for next cycle.