Wyvern Timer 2000R Operating Instructions
17
Start Delay Time or Pre-time
This is the time between inserting money or a card into the timer and the timer turning ON.
As soon as you start inserting coins or card and press the blue button, the display shows the
time purchased for a period determined by option 21. Once option 21 times-out the display
will show the programmed pre-time, along with a flashing ‘P’.*
Inserting further coins or pressing the smart card blue button will again cause the display to
show the total time purchased for a time determined by option 21.
*Note: If option 21 is set to zero pre-time is not displayed.
A further option (program code 27) allows the secondary output to be switched ON or OFF
during this pre-time period.
Program
Codes
Description Maximum
Value
Value Used
00
Start delay time in minutes
59
01
Start delay time in seconds
59
21
Time purchased display time
59
27
Secondary output on = ON
Secondary output off = OFF
-
Start Delay Time Programming Codes